Please use this identifier to cite or link to this item: http://repository.psa.edu.my/handle/123456789/4348
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMUHAMMAD ZAID BIN ZAINI-
dc.contributor.authorMUHAMMAD AMIR IRFAN BIN MOHAMED AZLAN-
dc.contributor.authorRANDELL DAMIEN BIN RONNIE-
dc.date.accessioned2023-09-13T02:43:19Z-
dc.date.available2023-09-13T02:43:19Z-
dc.date.issued2022-12-
dc.identifier.urihttp://repository.psa.edu.my/handle/123456789/4348-
dc.description.abstractWood can be cut with a hand saw, which is a type of cutting tool. A handle is connected to a blade that has a number of pointed teeth attached to it. Cutting something by hand can never result in a perfectly clean cut, which is one of the issues that we frequently come against. It is evident by the surface of the wood as well as the thickness. In addition, it is possible for it to become heated when it is used frequently, which may cause the material to readily break down. This project was started with the intention of designing a jig or saw support that may be used in the carpentry and joinery industries. In particular for the PolySkills and WorldSkills categories. It is common knowledge that they must achieve perfection by cutting the wood by hand and are prohibited from using power tools. Creating a mortise is made much simpler as a result of this effort. Mortise and tenon joints, which are used to connect the beams and columns of a wooden structure, frequently leave a space between the members of the structure. It is believed that this gap has an effect on the mechanical performance of the mortise and tenon joint (1). A simple saw support that can be made by following this method and measuring the iron that will be used. After you have measured the iron, you should attach it to the iron plate and then use the screws to tighten it. We have come to the conclusion that it is necessary to conduct a literature review in order to provide all of the research on materials and procedures in order to improve our knowledge regarding this project. All of the projects that are in some way connected to this are quite helpful, particularly for us to get a complete understanding of it. Following a lengthy discussion on a variety of materials and methods as well as extensive research, the materials that have shown to be the most suitable for our project have garnered widespread approval.en_US
dc.language.isoenen_US
dc.publisherPOLITEKNIK SULTAN SALAHUDDIN ABDUL AZIZ SHAHen_US
dc.titleEASY SAW SUPPORTen_US
Appears in Collections:Full Paper

Files in This Item:
File Description SizeFormat 
EASY SAW SUPPORT 08DKA20F1071 AMIR IRFAN.pdf967.52 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.