Abstract:
Welding is a process used to link two metal materials, by applying heat , pressure or both at once, to create one part. Welding has techniques for the relation between the two metal components. Creating this welding jig focuses mainly on learning path using the five attachment approaches. The incompatibility of the supporting material affects the welding relation greatly. Therefore the use of unsuitable supports during welding can allow the position of the welded material to change. That will result in unsatisfactory results in welding. As a result, the welding jig was produced to obtain the proper position of the welding material as well as the correct position of the welding material. It also becomes an appropriate supporting material which facilitates the welding process and can minimise the movement of welding material during welding. Hence, this Jig is made using soft steel that doesn't easily rust and has low cost. Not only that, the jig's reasonably stable location during welding can help. The use of jigs can be used only on flat-surface metal materials. This welding jig is typically a low cost design compared to welding jigs which use natural steel. Accordingly, due to its very small and light nature, and easy to transport, this welding jig is quickly transferred to another position and does not take up much room.
